PVC Card-based Material

PVC CARDS base material consists mainly of PVC resin component,used for making into card,barcode card,VIP CARDS,CARDS,CARDS,scrath the clothing and leather tag, warranty card,calendar,game point card,etc.

PVC, The introduction of the

1 Specification: The thickness, width, length and size errors of ordinary cards shall comply with Table 1 specified in Table 1

project	specifications	allowable deviation
thickness	0.15-0.25	±0.0075
	0.26-0.50	±0.01
	0.51-0.80	±0.015
width	250-1000	±1
length	300-1500	±1
Positive square degree	1m×1m	1.2

2 Appearance: The appearance index of ordinary cards shall conform to Table 2 stipulated in Table 2

project		metric
surface		The extinction / extinction is level with no flow marks and no extinction defects
glossiness%≤		16
fluorescence		Fluorescence
whiteness%		98-102
harshness	Ra um	0.7-1.2
	Rz um	5-9
impurity	Particle size: 0.3mm-0.8mm	10 ² / m
	Particle size of> 0.8m m	not allow

3. Mechanical properties: the mechanical performance indexes of the ordinary card shall comply with the provisions of Table 63

Table 3

project		metric
The tensile strength of the Mpa≥		40
Ball impact breakage rate%≤		35
The Vica softening temperature is ℃		77±2
density g/cm³		1.4±0.05
Surface tenine / cm ² ≥		38
Heating scaling% 140℃×10mi n	0.15mm-0.25mm≤	\|8\|
	0.26mm-0.50mm≤	\|5\|
	0.51mm-0.8.mm≤	\|3\|